G 410/510 GIS for the Natural Sciences
D. Percy
e-mail: percyd@pdx.edu

Winter Term 2000

Projecting Coverages in ArcView

In arcview 3.1 the Projector Extension must be loaded in order to reproject data:

First check to see if it is already loaded:

A.

From the File menu choose Extensions. Scroll down to see if Projector! is listed. If it is, and it's not checked, check it. If Projector! is not listed it needs to be added, go to part B.

If it is listed, check it.

After you do this a new button appears in your View windows to right of all the other buttons. It looks like a North Arrow. Go to C.

B.

1) copy the 3 files prjctr.* from the (assuming default installation...)

C:/esri/Av_gis30/arcview/samples/ext directory to the

C:/esri/Av_gis30/arcview/ext32 directory. COPY, don't MOVE. Hold down the Ctrl key while dragging files in order to copy them. Think of the "C" in Copy and Ctrl as a mnemonic device to help you remember this trick.

After you've done this, go back to A.

C.

The map units must be set in order to project data. Go to view properties and make sure that they are set correctly.

Next, select the Theme that you wish to reproject, and click the Projector! button. The next 4 dialog boxes will ask for

Output Units

Projection Properties (Custom Projection needed for Oregon GIS Service Center Projection)

Whether to Recalculate

Whether to Add to a View

Notes:

You can only reproject shapefiles.

Add your reprojected themes to a view in that projection! If you have multiple projected coverages in a view you won't be able to see them all (which is why you are reprojecting in the 1st place).

Add a little tag to the end of your filename to indicate what projection it is, like DD, UTM or SP. For example dunelines_SP.

Custom Projection needed for Oregon GIS Service Center Projection

The Oregon GIS Service Center has developed a custom state plane projection that is good for the whole state, rather than splitting it into North and South. In order to get your data into this format (or out of it) you need to use the Custom radio button in the Projection dialog box.

Note: This screen was captured from a View Properties session. The Projection Properties dialog box will look the same when called from Projector! extension.

BIG NOTE:

You MUST hit the Tab key or somehow move to another input field after you put in the False Easting value!!!!!!!! If you don't, the value that you typed in doesn't really get put in, it remains 0. This has to do with the Event Model in Windows. When you start editting a field, it saves the old value until you exit the field (which calls an OnChange event). Most dialog boxes know about this and call the OnChange event before accepting values. This one doesn't. I'd call this a bug!! Regardless, be aware of it. The symptom that you'll notice is that your data plots at the correct Latitude, but it's shifted a whole bunch to the east.

Other Note

I just recently figured out how to make the State GIS projection part of my list of available projections! Here is a zipped copy of my Default.prj USE AT YOUR OWN RISK!!! Installation instructions: make a BACKUP COPY of your old default.prj, located under AV_GIS30/Arcview/Etc, I called mine default.prj_original. Now copy the new default.prj into that directory. If the new projection (called Oregon-goofy) doesn't show up, try restarting Arcview. I also changed the default UTM zone to 10, since that's where I live. You cane read about changing your default.prj in the online help of ArcView, but only edit the file yourself if you have confidence in what you're doing. And back it up first.

You can obviously only do this if you have write rights to the directory.